Know How to Do Wavlink Extender Setup Using wifi.wavlink.com

If you are not satisfied with the performance of the existing router and extender then don’t need to worry. Go ahead with the Wavlink WiFi extender to boost the internet connection all around your home or office. If you have purchased a new Wavlink WiFi range extender then the first step that you need to take is to perform the Wavlink WiFi range extender setup. You can easily do this by using the web address wifi.wavlink.com or the IP address 192.168.10.1. It gives you access to the web utility of the Wavlink extender where you can set up, install and configure the network without any hassle. Scroll down and learn the easiest guidelines for the Wavlink WiFi mesh setup. 

Instructions for the Wavlink WiFi Range Extender Setup through wifi.wavlink.com 

The Wavlink WiFi range extender setup initiates the extender at a location where you get good signal coverage. Here you will get the instructions for the Wavlink WiFi Range Extender Setup through wifi.wavlink.com:

Step 1: The first step is to place the Wavlink WiFi range extender in the same room in which you have placed the host network and then connect it to your computer or laptop. 

Step 2: After that, go to the WiFi tab and then search for the SSID by the name wavlink_xxxx. Tap on the connect button. 

Step 3: Once you are connected, launch the Wavlink extender login webpage by entering the wifi.wavlink.com web address in the address bar of the web browser.

Step 4: If the wifi.wavlink.com web address does not work for you then use the IP address 192.168.10.1 to access the Wavlink WiFi range extender login webpage. 

Step 5: On the login page, enter the username and password for the Wavlink extender device. 

Step 6: Now, you will be redirected to the Wavlink setup page. The setup wizard will scan the available wireless networks. Choose your router network and enter the password if required.

Step 7: Thereafter, you can change the SSID (network name) and the passkey of the Wavlink WiFi extender network. 

Step 8: At last, tap on the Apply button to save the new changes made by you. The Wavlink WiFi repeater will reboot to save the changes. 

Steps for the Wavlink Router Setup through wifi.wavlink.com 

Walkthrough the below steps for the Wavlink router setup by using the wifi.wavlink.com web address:

Step 1: The first step is to plug in the Wavlink router to the power outlet and then connect your device to the modem using an Ethernet cable.

Step 2: After that, connect your computer to the Wavlink router. Thereafter, you will see a WiFi network name with Wavlink_xxx on the computer screen. Once it is displayed on the screen then enter the wireless password. Tap on the connect button. 

Step 3: Launch the internet browser of your choice on the connected device. Type wifi.wavlink.com web address or the IP address 192.168.10.1 into the URL bar of the web browser. 

Step 4: Now, you will be redirected to the Wavlink router setup page.

Step 5: Next, you are required to enter the login credential details of your device. You will easily find the default username and password given on the bottom of the Wavlink router. It will give you admin access to the Wavlink router web interface.

Step 6: The setup wizard will start detecting the internet connection setting. You need to wait for some time until the internet connection configuration is completed.

Step 7: Customize the wireless credentials such as SSID and the passkey for the Wavlink network.

Step 8: At last, tap on the Finish button to save and apply the changes made by you. 

By following the above-mentioned instructions, you can easily complete the Wavlink WiFi range extender setup by using the wifi.wavlink.com web address.